Telstra CDM882seu Industrial Router Telstra CDM882seu Industrial Router The CDM 882seu is simple to install and can offer a reliable and cost Effective solution for a wide variety of possible uses such as: High Speed Mobile Internet Access for Multiple Devices High Speed Primary Internet Access High Speed Wireless CCTV High Speed Internet Access Back up Product Features: UMTS/HSDPA data rates up to 3.6 Mbps RX 384Kbps TX, for high speed data transfer. Upgradeable to 7.2Mbps in the very near future Internal PPTP VPN Client– Offering the ability to add a fixed IP address to the device by connecting through a companies private network.(tested on CISCO and Microsoft RAS) Embedded Linux 2.4.27 Allowing for the installation of custom applications. USB Host controller, giving the ability to add on external devices such as additional memory. 10/100 Ethernet functionality, offering the ability to connect to many devices on a network. HTML configurable software, giving ease of set up from any P.C. Supports SNMP, PPoE, RIP, VRRP, and IPSEC Terminate Firmware remotely upgradeable and configurable over the Air Networks: UMTS/HSDPA 850/2100/1900MHz EDGE/GPRS/GSM 900/1800/1900MHz Data rates Downlink – 3.6Mbps Uplink – 384kbps Standby Input Current 230mA @ 12VDC Maximum Input Current 550mA @ 12 VDC User Data Rate 1.2, 2.2, 4.8, 9.6, 19.2, 38.4,57.6, 115.2kbps Data Connection V.24 DB9 female Ethernet 10/100bt full duplex USB Host Controller Dimensions 140mm (l) x 79 (w) x 43(d) Input Supply Voltage 8 - 28 VDC Operating Temperature Range -30 to +60 Degrees C Data SIM Card Mini SIM plug-in/removal (RF) Antenna connector SMA Pricing as at 28/01/08.